The ON-OFF ST modular kitchen is characterised by a self-standing structure equipped with folding door, which opens upwards electronically, revealing the worktop area inside. Once closed, it completely conceals the working area, transforming the kitchen into a monolithic furniture piece. The base units are available with or without handles and a tall unit with side-recessing door can be positioned next to them.
Base unit doors with no handle can be supplied, with the push opening system Tip-On.
A folding door opens upwards electronically and unveils everything that is needed in the kitchen.
The working area can be fitted with back panel, shelves, open-faced units, hood and a suspended compartment for oven. The oven can also be installed in tall unit.
Coated with high quality resin.
The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission.
Only for carcass.
THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK
Solvent-based matt lacquer.
Features:
• Solvent-base polyurethane coating
• Base coat of polyester.
• One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface.
FENIX NTM®
The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.
FENIX NTM® UNICOLOR
Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCCA
BLU FESS
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer.
The following features make SILCOLAK a top-quality finish:
• Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance (tested in laboratories).
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer.
Features:
The following features make ECOLAK a top-quality finish:
• Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance – tested in laboratories.
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Fossil oak wood found in river basins, result of thousands of years of underwater conservation, which gives the
wood several properties including hardness and giving it distinct light to dark colours tones, unique grains that enhance the wood rarity and the special design.
FOSSIL OAK
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints.
Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer.
Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure.
The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD RAYÈ
BRONZE RAYÈ
ANCIENT BRONZE RAYÈ
BRONZED BRASS RAYÈ
BRASS RAYÈ
COPPER RAYÈ
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
ALUMINIUM
AISI 304 box section stainless steel sheet.
MATT-SATIN
PRE-SATIN
AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI
O_STEEL SILVER
O-STEEL
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface.
The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
ARA
SIRIO
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CANALETTO WALNUT U.S.
CORE WALNUT
AMERICAN ELM
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation. Optional coverings in stone/marble/granite/composite are available.