Coated with high quality resin.
The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission.
Only for carcass.
BLACK SABLÈ
Solvent-based matt lacquer.
Features:
• Solvent-base polyurethane coating
• Base coat of polyester.
• One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface.
FENIX NTM®
The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.
FENIX NTM® UNICOLOR
Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCCA
BLU FESS
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer.
The following features make SILCOLAK a top-quality finish:
• Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance (tested in laboratories).
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
SIBERIA WHITE
MYRTUS GREEN
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CANALETTO WALNUT U.S.
CORE WALNUT
AMERICAN ELM
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
GREY STONE MARBLE
WHITE CARRARA MARBLE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish.
The decorative design is on the front surface only.
Features:
- Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties.
- Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould.
- Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate.
- Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE