Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
BASE UNITS
Characteristics
Made of 19 mm thick wood particle board panels, waterproof, with low formaldehyde emission treated with high performance melamine resin.
Height
790 MM
Depth
320 / 600 MM
Width
150 / 300 / 450 / 600 / 900 / 1200 MM
Finishes
ELM WOOD
THERMO-TREATED LARCH WOOD
GREY-GRAPHITE OAK
SQUARE EDGED DOOR
Thickness 23 mm
AMX DOOR
Thickness 18 – 23 mm
MELAMINE-COATED
LACQUERED
LASERMAT
VEENER WOOD
ALUMINIUM
GLASS
CORIAN
PAPERSTONE
STAINLESS STEEL
METAL OF DE CASTELLI
COMPOSITE
STONE-MARBLE-GRANITE
CLAY
Coated with high quality resin. The Boffi melamine-coated carcasses have the structure made of waterproof wood particle board panel with low formaldehyde emission.
THERMO-TREATED LARCH WOOD
ELM WOOD
ELM WOOD
Solvent-based matt lacquer. Features • Solvent-base polyurethane coating (not exclusive for Boffi, commercially available). • Base coat of polyester. • One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCCA
BLU FESS
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer. Features The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Indoor air emission: cat. A+ • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer Features The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Indoor air emission: cat. A+ • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CORE WALNUT
AMERICAN ELM
Fossil oak wood found in river basins, result of thousands of years of underwater conservation (1000-5000 BC), which gives the wood several properties including hardness and giving it distinct light to dark colours tones, unique grains that enhance the wood rarity and the special design.
FOSSIL OAK
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
ALUMINIUM
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD DATUK EBONY
ECOWOOD XILO INDIAN ROSEWOOD
SMOKED OAK
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
CANALETTO WALNUT U.S.
AMERICAN ELM
GREY-GRAPHITE OAK
ASG-GREY OAK
OAK
Aluminium sheet. Epoxy powder-coated finish.
DARK TOBACCO
DRY BLACK
Veneer reconstructed textured Eco-wood. Finished with water-based paint. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
CROSS ECOWOOD XILO 2.0 STRIPED BLACK
CROSS ECOWOOD XILO 2.0 PLANKED SAND
Wood layers, with support made of strip wood Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
GREY-GRAPHITE OAK SW
OLIVATO ASH WOOD SW
Slats, alternating thickness 20 / 23 mm - Solid wood layers, with support made of strip wood Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANAELLO LIGHT WALNUT
AMERICAN ELM SW
Solid wood layers. The special FREEHAND door (design Piero Lissoni) is characterized by horizontal furrows, spaced out irregularly. Horizontal grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
Solid wood layers, with support made of strip wood. The special SHADES door is characterized by vertical furrows, spaced out regularly. Vertical grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
THERMO TREATED OLIVATO ASH WOOD SW
NOCE LIGHT CANALETTO
OLMO AMERICANO SW
Tempered glass 4mm
MIRROR BLACK
MIRROR COFFEE
FROSTED EXTRALIGHT
LINEN MATÈ EXTRALIGHT
TRASPARENT SMOKY GREY
TRASPARENT EXTRALIGHT
SANDED PAINTED EXTRALIGHT COFFEE
SANDED PAINTED EXTRALIGHT DOVE GREY
SANDED PAINTED EXTRALIGHT WHITE
EXTRALIGHT PAINTED WHITE
FROSTED RIBBED EXTRALIGHT
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
SEMI-GLOSSY STRATUS GREY
WHITE
100% eco-friendly matt material, made of recycled paper, vegetal resins and natural colours.
BLACK
AISI 304 box section stainless steel sheet.
MATT-SATIN
PRE-SATIN STAINLESS STEEL
AISI 304 stainless steel sheet, solid wood edge. Edge feasible in: American elm SW / Canaletto LIGHT walnut (without “sawn effect”) / Olivato ash wood SW / Thermo-treated Olivato ash wood SW / Smoked dyed oak SW
PRE-SATIN STAINLESS STEEL
AISI 304 stainless steel sheet, orbital satin (Orbital Steel), solid wood edge. Edge feasible in: American elm SW / Canaletto LIGHT walnut (without “sawn effect”) / Olivato ash wood SW / Thermo-treated Olivato ash wood SW / Smoked dyed oak SW.
O_STEEL SILVER
O-STEEL
FRONT PANELS, PANELS, WORKTOPS, BACK PANELS, SINKS
O_STEEL SILVER
O-STEEL
Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.
DeErosion points K1 COPPER
DeErosion points K2 BRASS
DeErosion Freehand 2.0 K5 COPPER
DeErosion Freehand 2.0 K6 BRASS
DeOdd HAMMERED K3 STAINLESS STEEL
SATIN BRASS F1
ORBITAL DeLabrè G4 COPPER
DeLabrè G5 COPPER
STRIPPED DeLabrè G7 BRASS
DeLabrè F2 BRASS
DeOdd K4 STAINLESS STEEL
ORBITAL DeLabrè G2 STAINLESS STEEL
STRIPPED DeLabrè 7022 F12 STAINLESS STEEL
DeLabrè B E5 STAINLESS STEEL
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
KERANIUM
DOMOOS
SIRIUS BLACK
EDORA BEIGE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
ABSOLUTE BLACK GRANITE TAGLIO SEGA
WHITE CARRARA MARBLE TAGLIO SEGA
ABSOLUTE BLACK GRANITE SHADES
WHITE CARRARA MARBLE SHADES
GREY ITALY
QUARZITE SPIDER BLACK
SUPERWHITE MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
QUARZITE CALACATTA
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOS DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE
WHITE CARRARA MARBLE
QUARZITE SKY GOLD
GREY LAVA STONE
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
MELAMINE-COATED
EASYLAK+
LASERMAT
SILCOLAK
ECOLAK
WOOD
WOOD SELECTION
WOOD EXCLUSIVE
POLYESTER
EASY METALS
METALS
WOOD 3D
ALUMINIUM PLUS
TRACEWOOD
SOLID WOOD
SOLID WOOD 3D
SOLID WOOD FREEHAND
SOLID WOOD SHADES
GLASS
CORIAN
PAPERSTONE
STAINLESS STEEL
STAINLESS STEEL, SOLID WOOD EDGE
O_STEEL, SOLID WOOD EDGE
O_STEEL
METAL OF DE CASTELLI
MDI COMPOSITE
DEKTON® COMPOSITE
STONE-MARBLE-GRANITE
CLAY
PLINTH
Characteristics
Height
80 – 120 MM
Finishes
PAINTED MATT WHITE
STAINLEES STEEL FINISH
PAINTED MATT BLACK
View More
Boffi S.p.A.
Via Oberdan 70
