Informations Finishes Download

Indoor Kitchens | K6

Design: Norbert Wangen

SECOND GENERATION

The Norbert Wangen’s kitchen cube design, presented in several shapes and dimensions, revolutionises the concept of the compact kitchen. K5 kitchen, together with K6, represents the development of the original concept of K2, K3 and K4 models: a single stand-alone monobloc that contains all the necessary elements for cooking, with a sliding top able to conceal the working area when not in use and to turn into a snack bar for serving and sharing food when open.

The K5 kitchen features larger dimensions and includes two blocks, one for washing and one for cooking and storage. The block with washing area houses single or double sink, equipped with grids and chopping boards then covered by the sliding worktop. A back welded section with grids and small containers can be added to the washing area too. The sliding worktop has a locking system when open and creates a protruding dining/snack bar table. The cooking block is composed by a fixed working surface, coplanar with the sliding top of the washing block. It features a totally integrated stainless steel hood. When the sliding worktop is closed, it is uniform and totally linear.

KiThe cooking block features a totally integrated stainless steel hood.

Kitchen with sliding worktop along the backside; available in monoblock version or composed by two blocks.The sliding worktop allows to create a protruding dining/snack bar table and at the same time, once closed, conceals the washing and cooking area. The fronts are opened through the bevelled edge at the top of the door.

Information

Carcass

COMING SOON

Doors and Front Panels

COMING SOON

Worktops

COMING SOON

Handles

COMING SOON

Finishes

MELAMINE-COATED LACQUERED LASERMAT VEENER WOOD ALUMINIUM GLASS CORIAN PAPERSTONE STAINLESS STEEL METAL OF DE CASTELLI COMPOSITE STONE-MARBLE-GRANITE CLAY

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.

BEIGE LUXOR

BEIGE ARIZONA

INGO BLACK

ORINOCO COCCA

BLU FESS

BROMO GREY

JAIPUR RED

COMODORO GREEN

LONDON GREY

ANTRIM GREY

EFESO GREY

MALÈ WHITE

KOS WHITE

Water-based textured matt lacquer. Features The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Indoor air emission: cat. A+ • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

JET BLACK

ABYSS BLACK

SLATE GREY

SLIT

ROPE

HAY

GRAVEL GREY

LUTON GREY

OYSTER-PEARL

PAROS WHITE

SIBERIA WHITE

MYRTUS GREEN

Water-based “soft touch” matt lacquer Features The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Indoor air emission: cat. A+ • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BLACK

CHARCOAL

BASALT GREY

MUD

ÈCRU

OAT

PEBBLE GREY

CLOUD

MAGNOLIA

WARM WHITE

ARTIC WHITE

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

PETRA RED

JODHPUR BLUE

CALIGO GREEN

MILKY MINT

BLACK

DEEP GREY

ELEGANT GREY

GREY

GREY RAL 7038

SAND

ROPE

PEBBLE GREY

MAGNOLIA

WHITE

Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.

DeErosion points K1 COPPER

DeErosion points K2 BRASS

DeErosion Freehand 2.0 K5 COPPER

DeErosion Freehand 2.0 K6 BRASS

DeOdd HAMMERED K3 STAINLESS STEEL

SATIN BRASS F1

ORBITAL DeLabrè G4 COPPER

DeLabrè G5 COPPER

STRIPPED DeLabrè G7 BRASS

DeLabrè F2 BRASS

DeOdd K4 STAINLESS STEEL

ORBITAL DeLabrè G2 STAINLESS STEEL

STRIPPED DeLabrè 7022 F12 STAINLESS STEEL

DeLabrè B E5 STAINLESS STEEL

Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

BLACK POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

BIHARA (Exclusive Boffi finish)

BLACK

GREY

CAMEL

WHITE

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.