Free Zone
Free Zone by Boffi represents the pinnacle of minimalist design for modern bathrooms. This modular system of floating bathroom units stands out for its clean lines and its mono-material style. The handleless units have three opening systems: hinged doors, pull-out drawers and coplanar sliding doors, all accessible with an inconspicuous handle rail. This bar comes in various finishes, for a seamless visual effect, it’s recessed between the countertop and the front panel.
Versatility and Customisation
Free Zone configurations are ample and customisable, with washbasins compatible with the square countertop and available in different types, including top mount, undermount and flush mount. The design solutions of C.R.S. Boffi include a floating tall cabinet with door that perfectly complements the units.
Quality Materials
Refined materials such as varnishes, timbers, stone, composites, glass, and metals offer a wide range of choices for customising the bathroom décor. Among the novelties the standouts are the MDi composite by Inalco, and the solid timber finishes Freehand and Shades, which confer a distinctive, luxurious character to the bathroom.
The overarching philosophy of the Free Zone bathroom is to offer solutions with an understated style, yet high performing, where minimalism meets the ultimate definition of convenience. The outcome is a minimalist designer space that is a pleasure to utilise as well as admire.
Technical Details
BASE UNITS
Characteristics
Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.
Height
300 / 470 MM
Depth
470 MM
Width
300 / 450 / 600 / 900 / 1200 / 1500 / 1800 / 2100 / 2400 MM
Finishes
-
ELM WOOD
-
THERMO-TREATED LARCH WOOD
-
GREY-GRAPHITE OAK
SQUARE EDGED DOOR Thickness 23 mm 
AMX DOOR Thickness 18 – 23 mm 
SQUARE EDGED WORKTOPS Thickness 15 / 20 / 23 mm 
HANDLE RAIL The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Solvent-based matt lacquer. Features: • Solvent-base polyurethane coating • Base coat of polyester. • One paint coat, cross-applied
CORTINA WHITE
LEEDS GREY
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
KOS WHITE
MALÈ WHITE
EFESO GREY
ANTRIM GREY
LONDON GREY
COMODORO GREEN
JAIPUR RED
BROMO GREY
BLUE FES
ORINOCO COCOA
INGO BLACK
BEIGE ARIZONA
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
SIBERIA WHITE
PAROS WHITE
OYSTER-PEARL
LUTON GREY
GRAVEL GREY
HAY
ROPE
SLIT
SLATE GREY
ABYSS BLACK
JET BLACK
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BASALT GREY
CHARCOAL
BLACK
ARTIC WHITE
WARM WHITE
MAGNOLIA
CLOUD
PEBBLE GREY
OAT
ÈCRU
MUD
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface. The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
SIRIO
ARA
ANDROMEDA
COLUMBIA
HYDRA
LYRA
PEGASO
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
FOREST GREY
WHITE
MAGNOLIA
PEBBLE GREY
ROPE
SAND
GREY RAL 7038
GREY
ELEGANT GREY
DEEP GREY
BLACK
MILKY MINT
CALIGO GREEN
JODHPUR BLUE
PETRA RED
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
COPPER DARK
LEAD CLASS
SILVER STYLE
ZINC GLAM
IRON LUXURY
Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
COPPER RAYÈ
BRASS RAYÈ
BRONZED BRASS RAYÈ
ANCIENT BRONZE RAYÈ
BRONZE RAYÈ
LEAD RAYÈ
ALUMINIUM
WHITE
ZINC+
VINTAGE BRASS
COPPER+
TITANIUM
LEAD
Solid wood layers. The special FREEHAND door (design Piero Lissoni) is characterized by horizontal furrows, spaced out irregularly. Horizontal grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
AMERICAN ELM SW
CANALETTO LIGHT WALNUT
THERMO TREATED OLIVATO ASH WOOD SW
SMOKED DYED OAK SW
Solid wood layers, with support made of strip wood. The special SHADES door is characterized by vertical furrows, spaced out regularly. Vertical grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
AMERICAN ELM SW
CANALETTO LIGHT WALNUT
THERMO TREATED OLIVATO ASH WOOD SW
Aluminium sheet. Epoxy powder-coated finish.
DRY BLACK
DARK TOBACCO
Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.
DeLabrè B E5 STAINLESS STEEL
STRIPPED DeLabrè 7022 F12 STAINLESS STEEL
ORBITAL DeLabrè G2 STAINLESS STEEL
DeOdd K4 STAINLESS STEEL
DeLabrè F2 BRASS
STRIPPED DeLabrè G7 BRASS
DELABRÈ G5 COPPER
ORBITAL DeLabrè G4 COPPER
SATIN BRASS F1
DeOdd HAMMERED K3 STAINLESS STEEL
DeErosion Freehand 2.0 K6 BRASS
DeErosion Freehand 2.0 K5 COPPER
DeErosion points K2 BRASS
DeErosion points K1 COPPER
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ARGENTIUM
ALBARIUM
SIRIUS BLACK
DOMOOS
ZENITH WHITE
Veneer reconstructed textured Eco-wood. Finished with water-based paint. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
CROSS ECOWOOD XILO 2.0 PLANKED SAND
CROSS ECOWOOD XILO 2.0 STRIPED BLACK
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
WHITE
CAMEL
GREY
BLACK
BIHARA (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
BLACK POINTS (Exclusive Boffi finish)
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK (10.74)
OAK
AHS-GREY OAK
GREY-GRAPHITE OAK
AMERICAN ELM
CANALETTO WALNUT U.S.
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
SMOKED OAK
ECOWOOD INDIAN ROSEWOOD (10.23)
ECOWOOD DATUK EBONY (10.44)
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
AMERICAN ELM SW
CANALETTO LIGHT WALNUT "SAWN-EFFECT"
OLD GREY PINEWOOD
Slats, alternating thickness 20 / 23 mm - Solid wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
AMERICAN ELM SW
THERMO TREATED OLIVATO ASH WOOD SW
OLD GREY PINEWOOD
SMOKED DYED OAK SW
Tempered glass
EXTRALIGHT PAINTED WHITE (sanded or frosted)
EXTRALIGHT PAINTED DOVE GREY (frosted or sanded)
EXTRALIGHT PAINTED COFFEE (frosted or sanded)
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
WHITE CARRARA MARBLE
ABSOLUTE BLACK ZIMBABWE GRANITE
BLACK COSMIC GRANITE
EMPERADOR DARK MARBLE
GREY STONE MARBLE
GREY CARNICO MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
ITALIA GREY MARBLE
WHITE CARRARA MARBLE SHADES
ABSOLUTE BLACK ZIMBABWE GRANITE SHADES
WHITE CARRARA MARBLE SAWN EFFECT
ABSOLUTE BLACK ZIMBABWE GRANITE SAWN EFFECT
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
CANALETTO WALNUT U.S.
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
AMERICAN ELM
SMOKED OAK
ECOWOOD INDIAN ROSEWOOD (10.23)
ECOWOOD DATUK EBONY (10.44)
ECOWOOD TEAK
ALPINE WHITE OAK
FOSSIL OAK
OAK
ASH-GREY-OAK
GREY-GRAPHITE-OAK
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
EASYLAK+
LASERMAT
SILCOLAK
ECOLAK
CLAY
POLYESTER
EASY METALS
METALS
SOLID WOOD FREEHAND
SOLID WOOD SHADES / MINISHADES
ALUMINIUM PLUS
METAL OF DE CASTELLI
DEKTON® COMPOSITE
TRACEWOOD
MDI COMPOSITE
WOOD VEENER 3D
CORIAN®
SOLID WOOD
SOLID WOOD 3D
GLASS
STONE-MARBLE-GRANITE
WOOD VENEER
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
KOS WHITE
MALÈ WHITE
EFESO GREY
ANTRIM GREY
LONDON GREY
COMODORO GREEN
JAIPUR RED
BROMO GREY
BLUE FES
ORINOCO COCOA
INGO BLACK
BEIGE ARIZONA
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn). Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics: • Resin of natural origin, obtained from corn. • Weight reduction (approx. -30%) and unaltered robustness. • Reduced consumption of CO2 emissions generated by transport.
WHITE
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ARGENTIUM
ALBARIUM
SIRIUS BLACK
DOMOOS
ZENITH WHITE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
WHITE
CAMEL
GREY
BLACK
BIHARA (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
BLACK POINTS (Exclusive Boffi finish)
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
BLACK LAVA STONE
BLACK MARQUINIA
WHITE CARRARA MARBLE
ABSOLUTE BLACK ZIMBABWE GRANITE
BLACK COSMIC GRANITE
EMPERADOR DARK MARBLE
GREY STONE MARBLE
GREY CARNICO MARBLE
QUARTZITE CALACATTA
APPLE BLOSSOM WHITE LASA MARBLE
SUPERWHITE MARBLE
QUARTZITE SPIDER BLACK
ITALIA GREY MARBLE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
AMERICAN ELM SW
CANALETTO LIGHT WALNUT "SAWN-EFFECT"
OLD GREY PINEWOOD
LASERMAT
CRISTALPLANT®
DEKTON® COMPOSITE
MDI COMPOSITE
CORIAN®
STONE-MARBLE-GRANITE
SOLID WOOD
A carefully designed detail, the handle, can be added to the doors of the Boffi systems. The range is not limited to the classic wood, aluminium, or stainless-steel handle applied centrally or on the side: depending on the chosen model, it can be mounted on the door or fully integrated, ensuring maximum customisation and versatility.
From Boffi’s R&D centre come taps that are true designer items characterised by technical and aesthetic details. They can be swivel, fixed, with separable components, or with vertical movement, allowing for seamless integration with the countertop. Available in different finishes.
Universal
Garden
Fisher Island XL Stone
Iceland
Kupa
Lotus
Pietra
RD1
R.I.G.
Sabbia 3
Sabbia 6 - 7
Sabbia BTM
Sidel Stone
A45
Adige
Cathino 3 Stone
Fisher Island
Request More Info
Complete the Bathroom models Free Zone
Projects Made With Free Zone
View More
