Bathrooms / Bathroom models / I Fiumi ST
I Fiumi ST
Design: Claudio Silvestrin
Wall hung, modular base units without handle. Thanks to the 45° folding technique – angled sections of front and end panels that house the top – thicknesses are not visible, because the cabinet edges cover the top thickness. The drawers can be opened through the lower side of the front. The handle for opening the chest of drawers or drawer is on the lower side of the front. The basic containers are available in the monobloc version or in the terminal and intermediate components for articulated compositions; a model with a drawer and an open compartment is also included.
Lacquered or wooden finishes are available for the containers and fronts, while the tops can be made in Cristalplant®, Corian®, stone, marble, granite, Dekton® or MDI composite. Design Claudio Silvestrin.
The washbasin bases are compatible with countertop and built-in washbasins, built-in undercounter and flush-mounted molded washbasins
Characteristics
Height
400 MM
Depth
530 MM
Width
600 - 900 MM
Finishes
-

SILCOLAK
-

WOOD VENEER
I FIUMI ST Thickness 19 mm – 45° edges on all sides The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
SIBERIA WHITE
PAROS WHITE
OYSTER-PEARL
LUTON GREY
GRAVEL GREY
HAY
ROPE
SLIT
SLATE GREY
ABYSS BLACK
JET BLACK
MYRTUS GREEN
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
NATURAL OAK
CANALETTO WALNUT U.S.
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
AMERICAN ELM
SMOKED OAK
ECOWOOD INDIAN ROSEWOOD (10.23)
ECOWOOD DATUK EBONY (10.44)
ALPINE WHITE OAK
FOSSIL OAK
OAK
ASH-GREY-OAK
GREY-GRAPHITE-OAK
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn). Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics: • Resin of natural origin, obtained from corn. • Weight reduction (approx. -30%) and unaltered robustness. • Reduced consumption of CO2 emissions generated by transport.
WHITE
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
ARGENTIUM
ALBARIUM
SIRIUS BLACK
DOMOOS
ZENITH WHITE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
WHITE
CAMEL
BLACK
BIHARA (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
WHITE CARRARA MARBLE
ABSOLUTE BLACK ZIMBABWE GRANITE
BLACK COSMIC GRANITE
EMPERADOR DARK MARBLE
GREY STONE MARBLE
GREY CARNICO MARBLE
QUARTZITE CALACATTA
APPLE BLOSSOM WHITE LASA MARBLE
SUPERWHITE MARBLE
QUARTZITE SPIDER BLACK
ITALIA GREY MARBLE
From Boffi’s R&D centre come taps that are true designer items characterised by technical and aesthetic details. They can be swivel, fixed, with separable components, or with vertical movement, allowing for seamless integration with the countertop. Available in different finishes.
A carefully designed detail, the handle, can be added to the doors of the Boffi systems. The range is not limited to the classic wood, aluminium, or stainless-steel handle applied centrally or on the side: depending on the chosen model, it can be mounted on the door or fully integrated, ensuring maximum customisation and versatility.
Universal
Garden
Fisher Island XL Stone
Iceland
Pietra
RD1
Sabbia 3
Sabbia 6 - 7
Sabbia BTM
Sidel Stone
A45
Cathino 3 Stone
Emisfero Stone
Fisher Island
Request More Info
Complete the Bathroom models I Fiumi ST
Projects Made With I Fiumi ST
View More