
Bathrooms / Bathroom models / Case 5.0 Bath
Case 5.0 Bath
Design: Piero Lissoni


The Future of Designer Bathrooms. Boffi and Lissoni present CASE 5.0, an evolution in bathroom design that reflects twenty years of technological innovation and consumer feedback. Sleek design and state-of-the-art performance come together in this unique bathroom system. CASE 5.0 offers two variations: an impressive single-unit version and a wall system with practical and refined shelves. The wall versions feature 300mm-high drawers and 5cm-thick front panels that matches the dimensions of the CASE 5.0 kitchen.

This bathroom system stands out for the variety of the finishes available, including mirrored glass and a trowelled texture coating, which add a touch of elegance and modernity. The selection of materials reflects Boffi’s commitment to creating modern bathroom settings that are both practical and stylish.

CASE 5.0 is a step forward in bathroom design, combining the latest trends in style and performance. The fusion of the design language of kitchen and bathroom encapsulates Boffi and Lissoni’s innovative approach.




With CASE 5.0 Boffi establishes new bathroom design standards. This system is perfect for anyone seeking bathroom décor at the forefront of design and technology, offering tailor-made solutions for the modern home.

BASE UNITS
Characteristics
Made of 19 mm thick wood particle board panels, waterproof, with low formaldehyde emission treated with high performance melamine resin.
Height
300 / 470 MM
Depth
470 MM
Width
300 / 450 / 600 / 900 / 1200 MM
Finishes
-
THERMO-TREATED LARCH WOOD
-
ELM WOOD
-
GREY-GRAPHITE OAK



The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

RED RIBES

SIBERIA WHITE

PAROS WHITE

OYSTER-PEARL

LUTON GREY

GRAVEL GREY

HAY

ROPE

SLIT

SLATE GREY

ABYSS BLACK

JET BLACK

MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BASALT GREY

CHARCOAL

BLACK

ARTIC WHITE

WARM WHITE

MAGNOLIA

CLOUD

PEBBLE GREY

OAT

ÈCRU

MUD
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface. The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.

SIRIO

ARA

ANDROMEDA

COLUMBIA

HYDRA

LYRA

PEGASO
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

FOREST GREY

WHITE

MAGNOLIA

PEBBLE GREY

ROPE

SAND

GREY RAL 7038

GREY

ELEGANT GREY

DEEP GREY

BLACK

MILKY MINT

CALIGO GREEN

JODHPUR BLUE

PETRA RED
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.

COPPER DARK

LEAD CLASS

SILVER STYLE

ZINC GLAM

IRON LUXURY
Tempered glass

MIRROR COFFEE

MIRROR BLACK
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.

WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.

CANALETTO WALNUT U.S.

ECOWOOD XILO 2.0 PLANKED GREY (18.23)

ECOWOOD XILO 2.0 STRIPED BLACK (18.04)

AMERICAN ELM

SMOKED OAK

ECOWOOD INDIAN ROSEWOOD (10.23)

ECOWOOD DATUK EBONY (10.44)

ECOWOOD TEAK

ALPINE WHITE OAK

FOSSIL OAK

OAK

ASH-GREY-OAK

GREY-GRAPHITE-OAK

ECOWOOD XILO 2.0 PLANKED SAND (18.22)
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn). Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics: • Resin of natural origin, obtained from corn. • Weight reduction (approx. -30%) and unaltered robustness. • Reduced consumption of CO2 emissions generated by transport.

WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).

BEIGE LUXOR

KOS WHITE

MALÈ WHITE

EFESO GREY

ANTRIM GREY

LONDON GREY

COMODORO GREEN

JAIPUR RED

BROMO GREY

BLUE FES

ORINOCO COCOA

INGO BLACK

BEIGE ARIZONA
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.

MICRON

ARGENTIUM

ALBARIUM

SIRIUS BLACK

DOMOOS

ZENITH WHITE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

YORK

NEWLYN

WHITE

CAMEL

GREY

BLACK

BIHARA (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

BLACK POINTS (Exclusive Boffi finish)
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.

WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.

BLACK LAVA STONE

WHITE CARRARA MARBLE

ABSOLUTE BLACK ZIMBABWE GRANITE

BLACK COSMIC GRANITE

EMPERADOR DARK MARBLE

GREY STONE MARBLE

GREY CARNICO MARBLE

QUARTZITE CALACATTA

APPLE BLOSSOM WHITE LASA MARBLE

SUPERWHITE MARBLE

QUARTZITE SPIDER BLACK

ITALIA GREY MARBLE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.

SMOKED DYED OAK SW

AMERICAN ELM SW

CANALETTO LIGHT WALNUT "SAWN-EFFECT"

OLD GREY PINEWOOD
A carefully designed detail, the handle, can be added to the doors of the Boffi systems. The range is not limited to the classic wood, aluminium, or stainless-steel handle applied centrally or on the side: depending on the chosen model, it can be mounted on the door or fully integrated, ensuring maximum customisation and versatility.
From Boffi’s R&D centre come taps that are true designer items characterised by technical and aesthetic details. They can be swivel, fixed, with separable components, or with vertical movement, allowing for seamless integration with the countertop. Available in different finishes.

Universal

Garden

Fisher Island XL Stone

Iceland

Kupa

Lotus

Pietra

RD1

Sabbia 3

Sabbia 6 - 7

Sabbia BTM

Sidel Stone

A45

Cathino 3 Stone

Fisher Island
Request More Info
Complete the Bathroom models Case 5.0 Bath
View More