Abentis

Design: C.R.S Boffi

Abentis is the Boffi’s freestanding or wall drawer unit, designed with a focus on functionality and optimized space organization.

It features open compartments in veneered wood, drawers and storage units with push-to-open mechanism, available in melamine, wood, or lacquer and modular in various sizes.

This new element joins the world of Boffi storage systems, sharing the same approach to finishes and materials—including luxurious leather options for the top surface.

Technical Details

FINISHES

The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.

LACQUERED CLAY WOOD LASERMAT

Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.

COPPER RAYÈ

BRASS RAYÈ

BRONZED BRASS RAYÈ

ANCIENT BRONZE RAYÈ

BRONZE RAYÈ

LEAD RAYÈ

ALUMINIUM

WHITE

ZINC+

VINTAGE BRASS

COPPER+

TITANIUM

LEAD

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

FOREST GREY

WHITE

PEBBLE GREY

GREY RAL 7038

ELEGANT GREY

DEEP GREY

PETRA RED

Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.

NATURAL OAK

CANALETTO WALNUT U.S.

ECOWOOD XILO 2.0 PLANKED GREY (18.23)

ECOWOOD XILO 2.0 STRIPED BLACK (18.04)

AMERICAN ELM

SMOKED OAK

ECOWOOD INDIAN ROSEWOOD (10.23)

ECOWOOD DATUK EBONY (10.44)

ALPINE WHITE OAK

FOSSIL OAK

OAK

ASH-GREY-OAK

GREY-GRAPHITE-OAK

ECOWOOD XILO 2.0 PLANKED SAND (18.22)

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BASALT GREY

CHARCOAL

BLACK

ARTIC WHITE

WARM WHITE

MAGNOLIA

CLOUD

PEBBLE GREY

OAT

ÈCRU

MUD

Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

RED RIBES

SIBERIA WHITE

PAROS WHITE

OYSTER-PEARL

LUTON GREY

GRAVEL GREY

HAY

ROPE

SLIT

SLATE GREY

ABYSS BLACK

JET BLACK

MYRTUS GREEN

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).