Wardrobe & walk-in closet / Antibes | Walk-in closet
Antibes | Walk-in closet
Design: Piero Lissoni
Antibes walk-in wardrobe represents excellence in design and performance for storage spaces. This modular system was designed to meet different requirements, offering great flexibility in its configuration, which perfectly adapts to any space. Antibes stands out for its wide choice of accoutrements, high-quality finishes and an integrated lighting system, creating a superlative user experience.
With finishes available in melamine, painted or wood veneer, Antibes also comes in versions with an aluminium frame combined with glass, leather or fabric finishes. The interior, defined by a variety of drawers, pull-out doors and shelves, allows one to artfully display and organise the wardrobe, shoes and accessories, through the innovative use of glass, which adds visibility while protecting the contents. The finishes, which range from microfibers to a variety of coloured leathers, have been conceived to add a touch of sophistication and personality.
The system is complemented by the elegant freestanding unit available as a single or double chest of drawers, with push opening drawers in different finishes, including mirrored ones, and open compartments with removable trays.
Antibes walk-in closet can also be connected to the Antibes wardrobe components with a hinged door, ensuring consistency of style and performance throughout the entire space.
This system, which designer Piero Lissoni has curated down to the last detail, reflects an innovative approach in designing bespoke spaces, making Antibes an ideal solution for anyone seeking a mix of luxury, practicality, and design.
Module Structure
Characteristics
Structure in wood particle board or with low formaldehyde emission (class E1, CARB P2 / TSCA Title VI certified).
Height
2039 - 2327 - 2615 - 2903 HH
Depth
590 MM
Width
428 - 478 - 578 - 678 - 878 - 978 - 1178 MM
Finishes
-
MEL WHITE
-
BLACK SABLÈ
-
ELM WOOD
-
CANALETTO WALNUT
-
THERMO-TREATED LARCH WOOD
-
silcolak
-
OAK
-
ALPINE WHITE OAK
-
ASH-GREY-OAK
-
GREY-GRAPHITE-OAK
-
AMERICAN ELM
-
CANALETTO WALNUT U.S.
-
SMOKED OAK
-
ECOWOOD INDIAN ROSEWOOD (10.23)
-
ECOWOOD DATUK EBONY (10.44)
-
ECOWOOD TEAK
-
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
-
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
-
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
Module Structure
Characteristics
Structure in wood particle board or with low formaldehyde emission (class E1, CARB P2 / TSCA Title VI certified).
Height
2039 - 2327 - 2615 - 2903 HH
Depth
590 MM
Width
428 - 478 - 578 - 678 - 878 - 978 - 1178 MM
Finishes
-
MEL WHITE
-
BLACK SABLÈ
-
ELM WOOD
-
THERMO-TREATED LARCH WOOD
-
CANALETTO WALNUT
-
silcolak
-
OAK
-
ASH-GREY-OAK
-
ALPINE WHITE OAK
-
GREY-GRAPHITE-OAK
-
AMERICAN ELM
-
CANALETTO WALNUT U.S.
-
SMOKED OAK
-
ECOWOOD INDIAN ROSEWOOD (10.23)
-
ECOWOOD DATUK EBONY (10.44)
-
ECOWOOD TEAK (10.74)
-
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
-
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
-
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
Module Structure
Characteristics
Structure in wood particle board or with low formaldehyde emission (class E1, CARB P2 / TSCA Title VI certified).
Height
2039 - 2327 - 2615 - 2903 HH
Depth
590 MM
Width
428 - 478 - 578 - 678 - 878 - 978 - 1178 MM
Finishes
-
MEL WHITE
-
BLACK SABLÈ
-
ELM WOOD
-
THERMO-TREATED LARCH WOOD
-
CANALETTO WALNUT
-
silcolak
-
AMERICAN ELM
-
CANALETTO WALNUT U.S.
-
SMOKED OAK
-
ECOWOOD INDIAN ROSEWOOD (10.23)
-
ECOWOOD DATUK EBONY (10.44)
-
ECOWOOD TEAK (10.74)
-
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
-
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
The range of Boffi materials and their compatibility with individual products are constantly evolving : check with your dealer for the actual availability of the product in the desired finish.
Solvent-based matt lacquer. Features: • Solvent-base polyurethane coating • Base coat of polyester. • One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
Oak with knots
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
FOREST GREY
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD RAYÈ
BRONZE RAYÈ
ANCIENT BRONZE RAYÈ
BRONZED BRASS RAYÈ
BRASS RAYÈ
COPPER RAYÈ
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
Anodised extruded aluminium profile.
BLACK ANODISED ALUMINIUM
ALUMINIUM BRONZE
Tempered glass
MIRROR
EXTRALIGHT FROSTED
EXTRALIGHT LINEN MATÈ
TRASPARENT SMOKY GREY
TRASPARENT
Velvety material composed of polyamide and polyurethane.
DOVE GREY
Composition: 53% viscose, 24% linen, 21% cotton, 2% polyamide
ECRÙ
STRAW COLOURED
LIGHT GREY
TAUPE
WHITE
Corrected grain cattle leather, aniline-dyed.
ATENA
AGATA
Material composed of leather, cotton and polyurethane.
ANTRACITE GREY
TAUPE
Coated with high quality resin. The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission. Only for carcass.
Grey Wood
CANALETTO WALNUT
MEL WHITE
BLACK SABLÈ
THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK
Composition: 100% wool
DARK RED
PINE TREE
OCTANIO
BRIC
MEDIUM GREY
LIGHT GREY
CAMEL
BEIGE
Request More Info
Complete the Wardrobe & walk-in closet Antibes | Walk-in closet
View More