B15 is a minimal and linear monobloc base unit, with double pull-out drawer. The washbasin is integrated in the top, which is characterised by the accentuated slope of the front edge and side that draws the hand into the handle in order to open the cabinet. The top with integrated washbasin and the side panel can be in white Carrara or black Marquinia marble (with right or left side panel) or in Cristalplant® (with right side panel only).
In both cases, the washbasin with space-saving siphon is available, which allows the full use of the under-top drawer. Design Norbert Wangen.
The washbasin is integrated in the top sliding down on one side, shaping the side panel of the cabinet.
The beveled profile reflects a fil-rouge of the designer.
Coated with high quality resin.
The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission.
Only for carcass.
THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK
Solvent-based matt lacquer.
Features:
• Solvent-base polyurethane coating
• Base coat of polyester.
• One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface.
FENIX NTM®
The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view.
FENIX NTM® UNICOLOR
Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCCA
BLU FESS
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer.
The following features make SILCOLAK a top-quality finish:
• Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance (tested in laboratories).
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer.
Features:
The following features make ECOLAK a top-quality finish:
• Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance – tested in laboratories.
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CANALETTO WALNUT U.S.
CORE WALNUT
AMERICAN ELM
Fossil oak wood found in river basins, result of thousands of years of underwater conservation, which gives the
wood several properties including hardness and giving it distinct light to dark colours tones, unique grains that enhance the wood rarity and the special design.
FOSSIL OAK
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax.
The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again.
Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites).
In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints.
Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer.
Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure.
The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD RAYÈ
BRONZE RAYÈ
ANCIENT BRONZE RAYÈ
BRONZED BRASS RAYÈ
BRASS RAYÈ
COPPER RAYÈ
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
ALUMINIUM
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain.
The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood.
Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
Slats, alternating thickness 20 / 23 mm - Solid wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain.
The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood.
Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANAELLO LIGHT WALNUT
AMERICAN ELM SW
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn).
Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics:
• Resin of natural origin, obtained from corn.
• Weight reduction (approx. -30%) and unaltered robustness.
• Reduced consumption of CO2 emissions generated by transport.
WHITE
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface.
The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.