Informations Finishes Download

Kitchens / Indoor Kitchens / Cove Kitchen Monoblock

Indoor Kitchens | Cove Kitchen Monoblock

Design: Zaha Hadid

THE MIGRATION OF SHAPES

From the unique and indisputable creativity of Zaha Hadid, a model characterized by sinuous and simple forms, using malleable materials such as Corian® and wood. The island with all the necessary functionalities becomes a place of conviviality thanks to a very special snack area obtained from the monobloc structure. This product won the Muuuz international Awards (MIAW) 2017 in Kitchen & Bath product category.

Best of Year Award Winners 2017 – product category: KITCHEN: CABINETRY. ELLE DECO INTERNATIONAL DESIGN AWARDS (EDIDA) 2018 in kitchen category

Its sinuous geometry achieves perfect harmony, thanks to malleable materials such as Corian® and wood.

A perfect geometrical monobloc that features every functionality.

Technical Details

CARCASS

BASE UNITS

Characteristics

Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.

Height

790 MM

Depth

600 MM

Width

150 - 300 - 450 - 600 - 900 - 1200 MM

Finishes

THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK

HANDLES

HANDLE RAIL

FRONTAL FINISHES

LACQUERED LASERMAT WOOD CLAY CORIAN® STAINLESS STEEL GLASS ALUMINIUM METAL OF DE CASTELLI COMPOSITE STONE-MARBLE-GRANITE

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).

BEIGE LUXOR

BEIGE ARIZONA

INGO BLACK

ORINOCO COCOA

BLUE FES

BROMO GREY

JAIPUR RED

COMODORO GREEN

LONDON GREY

ANTRIM GREY

EFESO GREY

MALÈ WHITE

KOS WHITE

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BLACK

CHARCOAL

BASALT GREY

MUD

ÈCRU

OAT

PEBBLE GREY

CLOUD

MAGNOLIA

WARM WHITE

ARTIC WHITE

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

SAVANNAH BROWN

New

FOREST GREY

New

PETRA RED

JODHPUR BLUE

CALIGO GREEN

MILKY MINT

BLACK

DEEP GREY

ELEGANT GREY

GREY

GREY RAL 7038

SAND

ROPE

PEBBLE GREY

MAGNOLIA

WHITE

Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.

LEAD RAYÈ

New

BRONZE RAYÈ

New

ANCIENT BRONZE RAYÈ

New

BRONZED BRASS RAYÈ

New

BRASS RAYÈ

New

COPPER RAYÈ

New

LEAD

TITANIUM

COPPER+

VINTAGE BRASS

ZINC+

ALUMINIUM

WHITE

Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.

IROKO

SMOKED DYED OAK SW

NATURAL OAK WOOD

OLD GREY PINEWOOD

THERMO TREATED OLIVATO ASH WOOD SW

CANALETTO LIGHT WALNUT "SAWN-EFFECT"

AMERICAN ELM SW

GREY-GRAPHITE OAK SW

OLIVATO ASH WOOD SW

Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.

DeErosion points K1 COPPER

DeErosion points K2 BRASS

DeErosion Freehand 2.0 K5 COPPER

DeErosion Freehand 2.0 K6 BRASS

DeOdd HAMMERED K3 STAINLESS STEEL

SATIN BRASS F1

ORBITAL DeLabrè G4 COPPER

DeLabrè G5 COPPER

STRIPPED DeLabrè G7 BRASS

DeLabrè F2 BRASS

DeOdd K4 STAINLESS STEEL

ORBITAL DeLabrè G2 STAINLESS STEEL

STRIPPED DeLabrè 7022 F12 STAINLESS STEEL

DeLabrè B E5 STAINLESS STEEL

Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

YORK

New

NEWLYN

New

BLACK POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

BIHARA (Exclusive Boffi finish)

BLACK

GREY

CAMEL

WHITE

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.