Cove Kitchen
Design: Zaha Hadid
Originally launched in 2017 as a limited edition and renewed in 2024 to mark Boffi’s 90th anniversary, Cove evolves further in 2025 with new finishes for doors and countertops, along with the introduction of a full-length snack counter on the rear side.
Cove Kitchen fully embodies the unmistakable architectural aesthetic of Zaha Hadid Design, defined by sinuous and dynamic forms.
This iconic design seamlessly merges with Boffi’s innovation and technological expertise, resulting in a kitchen that blends sculptural elegance with advanced functionality delivering a refined, uncompromising user experience.
“Ultimately, architecture is the creation of pleasant and stimulating environments for all aspects of social life.” Zaha Hadid, Pritzker Prize Laureate, 2004
Characteristics
Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.
Height
790 MM
Depth
600 MM
Width
150 - 300 - 450 - 600 - 900 - 1200 MM
Finishes
-
THERMO-TREATED LARCH WOOD
-
ELM WOOD
-
GREY-GRAPHITE OAK
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
SIBERIA WHITE
PAROS WHITE
OYSTER-PEARL
LUTON GREY
GRAVEL GREY
HAY
ROPE
SLIT
SLATE GREY
ABYSS BLACK
JET BLACK
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BASALT GREY
CHARCOAL
BLACK
ARTIC WHITE
WARM WHITE
MAGNOLIA
CLOUD
PEBBLE GREY
OAT
ÈCRU
MUD
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface. The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
ORION
SIRIO
ARA
ANDROMEDA
COLUMBIA
HYDRA
LYRA
PEGASO
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
COPPER DARK
LEAD CLASS
SILVER STYLE
ZINC GLAM
IRON LUXURY
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
NATURAL OAK SW
SMOKED DYED OAK SW
OLD GREY PINEWOOD
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
ALUMINIUM
WHITE
ZINC+
VINTAGE BRASS
COPPER+
TITANIUM
LEAD
SILCOLAK
ECOLAK
CLAY
EASY METALS
CORIAN®
SOLID WOOD WEST
METALS
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
BLACK LAVA STONE
ROSSO LEPANTO MARBLE
VERDE ALPI MARBLE
QUARTZITE BRECCIA IMPERIALE
WHITE CARRARA MARBLE
ABSOLUTE BLACK ZIMBABWE GRANITE
BLACK COSMIC GRANITE
EMPERADOR DARK MARBLE
GREY STONE MARBLE
GREY CARNICO MARBLE
QUARTZITE CALACATTA
APPLE BLOSSOM WHITE LASA MARBLE
SUPERWHITE MARBLE
QUARTZITE SPIDER BLACK
ITALIA GREY MARBLE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
WHITE
CAMEL
BLACK
BIHARA (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
BLACK POINTS (Exclusive Boffi finish)
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
ARGENTIUM
ALBARIUM
SIRIUS BLACK
DOMOOS
ZENITH WHITE
CORIAN®
STONE-MARBLE-GRANITE
MDI COMPOSITE
DEKTON® COMPOSITE
Characteristics
Height
100 MM
Finishes
-
silcolak
-
ecolak
-
clay
-
easy-metals
-
metals
-
WHITE
Request More Info
Complete the Indoor kitchens Cove Kitchen
View More
