Suggestions
Menu
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina
Modello Cucina

Indoor Kitchens | K21

Design: Norbert Wangen

TO ADAPT, THEREFORE TO CHANGE.

The K21 kitchen model originates from the innovative concept of the designer Norbert Wangen who, in the K series designed for Boffi, has transformed the concept of compact kitchen. The wall or peninsula/island modular base units have no handles: the door opening is guaranteed by the particular wrapping shape of front panels that hides, with close doors, the worktop thickness giving an extremely defined and monolithic appearance to the composition, highlighted by the recessed worktop with lowered portion (“basin effect”).

The front opening is allowed thanks to the upper protruding part on the worktop of the front itself.

The wrapping shape of front panels hides, with close doors, the worktop thickness giving a monolithic appearance to the composition.

  • LUXURY DESIGN KITCHEN K21 SLIDE1
  • LUXURY DESIGN KITCHEN K21 SLIDE2

The front opening is allowed thanks to the upper protruding part (on the worktop) of the front itself. A middle handle-rail in extruded aluminium is set when drawers and heavy-duty drawers are used.

Technical Details

BASE UNITS

Characteristics

Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.

Height

790 MM

Depth

320 - 470 - 600 MM

Width

300 - 450 - 600 - 900 - 1200 MM

Finishes

  • Nobilitato larice Termico

    THERMO-TREATED LARCH WOOD

  • Nobilitato olmo

    ELM WOOD

  • Nobilitato rovere grafite

    GREY-GRAPHITE OAK

 K21 Thickness 40 mm
Finiture Colors Close

Solvent-based matt lacquer. Features: • Solvent-base polyurethane coating • Base coat of polyester. • One paint coat, cross-applied

LEEDS GREY

LEEDS GREY

CORTINA WHITE

CORTINA WHITE

Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

RED RIBES

RED RIBES

JET BLACK

JET BLACK

ABYSS BLACK

ABYSS BLACK

SLATE GREY

SLATE GREY

SLIT

SLIT

ROPE

ROPE

HAY

HAY

GRAVEL GREY

GRAVEL GREY

LUTON GREY

LUTON GREY

OYSTER-PEARL

OYSTER-PEARL

PAROS WHITE

PAROS WHITE

SIBERIA WHITE

SIBERIA WHITE

MYRTUS GREEN

MYRTUS GREEN

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BLACK

BLACK

CHARCOAL

CHARCOAL

BASALT GREY

BASALT GREY

MUD

MUD

ÈCRU

ÈCRU

OAT

OAT

PEBBLE GREY

PEBBLE GREY

CLOUD

CLOUD

MAGNOLIA

MAGNOLIA

WARM WHITE

WARM WHITE

ARTIC WHITE

ARTIC WHITE

Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.

GREY WOOD

GREY WOOD

ALPINE WHITE OAK

ALPINE WHITE OAK

ECOWOOD TEAK

ECOWOOD TEAK

ECOWOOD DATUK EBONY (10.44)

ECOWOOD DATUK EBONY (10.44)

ECOWOOD INDIAN ROSEWOOD (10.23)

ECOWOOD INDIAN ROSEWOOD (10.23)

SMOKED OAK

SMOKED OAK

CANALETTO WALNUT U.S.

CANALETTO WALNUT U.S.

AMERICAN ELM

AMERICAN ELM

ECOWOOD XILO 2.0 STRIPED BLACK (18.04)

ECOWOOD XILO 2.0 STRIPED BLACK (18.04)

ECOWOOD XILO 2.0 PLANKED GREY (18.23)

ECOWOOD XILO 2.0 PLANKED GREY (18.23)

ECOWOOD XILO 2.0 PLANKED SAND (18.22)

ECOWOOD XILO 2.0 PLANKED SAND (18.22)

GREY-GRAPHITE-OAK

GREY-GRAPHITE-OAK

ASH-GREY-OAK

ASH-GREY-OAK

OAK

OAK

Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.

LEAD CLASS

LEAD CLASS

COPPER DARK

COPPER DARK

IRON LUXURY

IRON LUXURY

ZINC GLAM

ZINC GLAM

SILVER STYLE

SILVER STYLE

Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.

LEAD RAYÈ

LEAD RAYÈ

BRONZE RAYÈ

BRONZE RAYÈ

ANCIENT BRONZE  RAYÈ

ANCIENT BRONZE RAYÈ

BRONZED BRASS RAYÈ

BRONZED BRASS RAYÈ

BRASS RAYÈ

BRASS RAYÈ

COPPER RAYÈ

COPPER RAYÈ

LEAD

LEAD

TITANIUM

TITANIUM

COPPER+

COPPER+

VINTAGE BRASS

VINTAGE BRASS

ZINC+

ZINC+

ALUMINIUM

ALUMINIUM

WHITE

WHITE

It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.

BLACK

BLACK

WHITE

WHITE

AISI 304 box section stainless steel sheet.

MATT-SATIN

MATT-SATIN

PRE-SATIN

PRE-SATIN

Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.

IROKO

IROKO

SMOKED DYED OAK SW

SMOKED DYED OAK SW

NATURAL OAK WOOD

NATURAL OAK WOOD

OLD GREY PINEWOOD

OLD GREY PINEWOOD

THERMO TREATED OLIVATO ASH WOOD SW

THERMO TREATED OLIVATO ASH WOOD SW

CANALETTO LIGHT WALNUT

CANALETTO LIGHT WALNUT "SAWN-EFFECT"

AMERICAN ELM SW

AMERICAN ELM SW

GREY-GRAPHITE OAK SW

GREY-GRAPHITE OAK SW

OLIVATO ASH WOOD SW

OLIVATO ASH WOOD SW

AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI

O_STEEL SILVER

O_STEEL SILVER

O_STEEL

O_STEEL

EASYLAK+

EASYLAK+

SILCOLAK

SILCOLAK

ECOLAK

ECOLAK

WOOD VENEER

WOOD VENEER

EASY METALS

EASY METALS

METALS

METALS

CORIAN®

CORIAN®

STAINLESS STEEL

STAINLESS STEEL

SOLID WOOD

SOLID WOOD

O_STEEL

O_STEEL

Finiture Doors Colors Close

AISI 304 box section stainless steel sheet.

MATT-SATIN

MATT-SATIN

It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.

BLACK

BLACK

WHITE

WHITE

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.

BRECCIA IMPERIALE QUARZITE

BRECCIA IMPERIALE QUARZITE

VERDE ALPI MARBLE

VERDE ALPI MARBLE

ROSSO LEPANTO MARBLE

ROSSO LEPANTO MARBLE

ABSOLUTE BLACK GRANITE SAWN EFFECT

ABSOLUTE BLACK GRANITE SAWN EFFECT

WHITE CARRARA MARBLE SAWN EFFECT

WHITE CARRARA MARBLE SAWN EFFECT

ABSOLUTE BLACK GRANITE SHADES

ABSOLUTE BLACK GRANITE SHADES

WHITE CARRARA MARBLE SHADES

WHITE CARRARA MARBLE SHADES

ITALIA GREY

ITALIA GREY

QUARTZITE SPIDER BLACK

QUARTZITE SPIDER BLACK

SUPERWHITE MARBLE

SUPERWHITE MARBLE

APPLE BLOSSOM WHITE LASA MARBLE

APPLE BLOSSOM WHITE LASA MARBLE

QUARTZITE CALACATTA

QUARTZITE CALACATTA

GREY CARNICO MARBLE

GREY CARNICO MARBLE

GREY STONE MARBLE

GREY STONE MARBLE

EMPERADOR DARK MARBLE

EMPERADOR DARK MARBLE

BLACK COSMIC GRANITE

BLACK COSMIC GRANITE

ABSOLUTE BLACK ZIMBABWE GRANITE

ABSOLUTE BLACK ZIMBABWE GRANITE

WHITE CARRARA MARBLE

WHITE CARRARA MARBLE

QUARTZITE SKY GOLD

QUARTZITE SKY GOLD

GREY LAVA STONE

GREY LAVA STONE

STAINLESS STEEL

STAINLESS STEEL

CORIAN®

CORIAN®

STONE-MARBLE-GRANITE

STONE-MARBLE-GRANITE

PLINTH

Characteristics

Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation. Optional coverings in stone/marble/granite/composite are available.

Height

80 - 100 MM

Finishes

  • Zoccolo fascia Maniglia distanziatori verniciato bianco opaco

    PAINTED MATT WHITE

  • Zoccolo fascia Maniglia distanziatori inox

    STAINLEES STEEL FINISH

  • Zoccolo fascia Maniglia distanziatori verniciato nero opaco

    PAINTED MATT BLACK

C.R.S.
Height
80 MM
Depth
min. 630 MM / max 1260 MM
Width
min. 1000 MM / max 3000 MM
TABULA
Height
80 MM
Depth
min. 630 MM / max 1260 MM
Width
min. 1000 MM / max 3000 MM
Find a Store More Info

Request More Info

    As per the provisions of Articles 6, 7, 12, and 13 of the EU Regulation 2016/679 – GDPR:

    By continuing, I declare that I have read the privacy policy of BOFFI SPA regarding the processing of personal data.

    Complete the Indoor Kitchens K21

    COMPONENTS

    Projects Made With K21

    View More