Case 5.0

Design: Piero Lissoni

CASE 5.0 represents an evolution in luxury kitchen design, combining advanced technology and style in a model that has gone through twenty years of continuous innovation. Initially presented at the 2022 edition of Milan Design Week, this kitchen has undergone transformations that have taken it to new levels of functional and aesthetic excellence. For example, there is now the possibility of having doors made specifically for CASE 5.0 in 6 mm glass with a folding effect in which the glass covers the entire structure of the door and the front handle to give continuity to the material. Four shades of applicable reflective glass are proposed: coffee, grey, black and dove grey. For CASE 5.0, Boffi also introduces the CASE 5.0 sliding peninsula equipped with a frame with sliding guides, mounted directly on the kitchen top, which allow three types of sliding: lateral, frontal and oblique to create practical cantilevered areas for food preparation and service..

Sink Configurations and Quality Materials

CASE 5.0 presents sinks of importance and capacity equivalent to its size and design. They are available in stainless steel or as a marble undercounter, MDi by Inalco composite and granite, which adapt perfectly to any kitchen style. Configurations include single bowl with drainer, double bowl or 1 meter sink, integrating perfectly with existing Boffi proposals.

Advanced Technology in the Kitchen

The CASE 5.0 kitchen is equipped with an MDi Induction induction cooking system which guarantees efficiency and style. The large sinks are another strong point, offering space and versatility for every culinary need.

The dimensions of CASE 5.0 allow sinks of equal size and capacity. This gives rise to new configurations in stainless steel, or as an undercounter in marble, Inalco MDi composite and granite. The properties of the materials allow them to be created in a single basin with drain, double basin or 1 meter sink in addition to the basins already present in the Boffi offer.

Technical Details

CARCASS

Characteristics

Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.

Height

790 MM

Depth

470 / 600 MM

Width

450 / 600 / 900 / 1200 MM

Finishes

ELM WOOD
THERMO-TREATED LARCH WOOD
GREY-GRAPHITE OAK

View Less

DOORS AND FRONT PANELS

CASE 5.0 Thickness 50 mm

WORKTOPS

SQUARE EDGED CASE 5.0 Thickness 12 / 20 MM

HANDLES

HANDRAIL

FRONT FINISHES

The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.

LACQUERED CLAY WOOD CORIAN® GLASS STAINLESS STEEL

Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

RED RIBES

SIBERIA WHITE

PAROS WHITE

OYSTER-PEARL

LUTON GREY

GRAVEL GREY

HAY

ROPE

SLIT

SLATE GREY

ABYSS BLACK

JET BLACK

MYRTUS GREEN

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BASALT GREY

CHARCOAL

BLACK

ARTIC WHITE

WARM WHITE

MAGNOLIA

CLOUD

PEBBLE GREY

OAT

ÈCRU

MUD

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

FOREST GREY

WHITE

PEBBLE GREY

GREY RAL 7038

ELEGANT GREY

DEEP GREY

PETRA RED

SILCOLAK

ECOLAK

CLAY

POLYESTER

EASY METALS

WOOD VENEER

CORIAN®

GLASS

O_STEEL

WORKTOP FINISHES

The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.

LASERMAT STAINLESS STEEL COMPOSITE CORIAN® STONE-MARBLE-GRANITE

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).

BEIGE LUXOR

KOS WHITE

MALÈ WHITE

EFESO GREY

ANTRIM GREY

LONDON GREY

COMODORO GREEN

JAIPUR RED

BROMO GREY

BLUE FES

ORINOCO COCOA

INGO BLACK

BEIGE ARIZONA

Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

YORK

NEWLYN

WHITE

CAMEL

BLACK

BIHARA (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

BLACK POINTS (Exclusive Boffi finish)

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.