In the Evolution version, the Combine monobloc kitchen is enriched with new solutions, creating more composition possibilities and more function modules. The kitchen blocks for washing and cooking area and the block with preparation/working area are now connected by a metal structure equipped with wooden drawers, housing a big snack table made of solid wood staves. An equipped track for countertops, called Inside System, has been integrated in this kitchen.
It is positioned in the back of cooking and washing areas, equipped with some sliding lids that cover storage compartments fitted with accessories of Inside series, such as cutlery trays, knives holders, spice holders, oil bottle holder, electric sets with hidden sockets. In addition to the totally integrated downdraft hood, the worktops house an elegant long hanging bar for ladles or other accessories, equipped with LED lighting. The higher doors than standard (+2 cm), make the monobloc kitchen even more sophisticated and monolithic.
Complete integration of the dining area with peninsula and Inside System Track for countertops that can be equipped with accessories of Inside series: cutlery trays, knives holders, spice holders, oil bottle holder, electric sets with hidden sockets.
Modular system made of units for island compositions. The specific worktops feature a specific bevelled perimeter profile, that tilts internally. The fronts are opened by gripping the upper protruding part of the door.
The surfaces and doors are available in the new composite MDI: a high-performance material, made of high-purity minerals soft to the touch and feasible in the two exclusive colours Devon (light grey) and Surrey (dark grey). This composite is hygienic and nontoxic, highly resistant, made of recycled materials, so totally ecological. Combine Evolution furnishes the environments, offering lots of compositional, functional and material possibilities to create a complete, sophisticated and contemporary kitchen system.
Coated with high quality resin.
The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission.
Only for carcass.
THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK
Solvent-based matt lacquer.
Features:
• Solvent-base polyurethane coating
• Base coat of polyester.
• One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Water-based textured matt lacquer.
The following features make SILCOLAK a top-quality finish:
• Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance (tested in laboratories).
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer.
Features:
The following features make ECOLAK a top-quality finish:
• Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance – tested in laboratories.
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Fossil oak wood found in river basins, result of thousands of years of underwater conservation, which gives the
wood several properties including hardness and giving it distinct light to dark colours tones, unique grains that enhance the wood rarity and the special design.
FOSSIL OAK
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax.
The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again.
Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites).
In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
SAVANNAH BROWN
FOREST GREY
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints.
Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer.
Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure.
The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD RAYÈ
BRONZE RAYÈ
ANCIENT BRONZE RAYÈ
BRONZED BRASS RAYÈ
BRASS RAYÈ
COPPER RAYÈ
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
ALUMINIUM
Solid wood layers. The special FREEHAND door (design Piero Lissoni) is characterized by horizontal furrows, spaced out irregularly. Horizontal grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
AISI 304 box section stainless steel sheet.
MATT-SATIN
PRE-SATIN
AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI
O_STEEL SILVER
O-STEEL
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish.
The decorative design is on the front surface only.
Features:
- Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties.
- Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould.
- Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate.
- Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface.
The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
ARA
SIRIO
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CANALETTO WALNUT U.S.
CORE WALNUT
AMERICAN ELM
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation. Optional coverings in stone / marble / granite / composite are available.